Wadia A-102 power amp & DI-122 DAC/PRE-AMP

Categorien: ,
1,700.00

Hele mooie set van het gerenomeerde merk Wadia.

De set bestaat uit de DI-122 DAC en voorversterker en een krachtige A-102 eindversterker. Alles compleet en zo goed als nieuw!
Speelt werkelijk wonderschoon.

Beschrijving

Beschrijving

Hele mooie set van het gerenomeerde merk Wadia.

De set bestaat uit de DI-122 DAC en voorversterker en een krachtige A-102 eindversterker. Alles compleet en zo goed als nieuw!
Speelt werkelijk wonderschoon.

Sluit gemakkelijk al uw digitale bronnen, zoals cd speler, streamer en tv, aan op de DI-122 en genieten maar.
Zie hieronder de specs en een review!

Wij werken uitsluitend op afspraak, maar ’s avonds en in het weekend is geen enkel probleem. Inruil van courante producten en merken is in goed overleg mogelijk.

Spec’s A-102

POWER OUTPUT
50 watts into 8 ohm loads
80 watts into 4 ohm loads

OUTPUT LOAD IMPEDANCE
8 ohms or 4 ohms

RATED POWER BAND
20Hz to 20kHz

TOTAL HARMONIC DISTORTION
0.2% maximum harmonic distortion at any level from 250 milliwatts to one-half of rated power output, 20Hz to 20kHz;
0.5% maximum harmonic distortion at any level from one-half to full rated power output, 20Hz to 20kHz

DYNAMIC HEADROOM
1dB 8 ohm load
1.3dB 4 ohm load

FREQUENCY RESPONSE
+0, -0.5dB from 20Hz to 20kHz
+0, -3.0dB from 10Hz to 50kHz

INPUT SENSITIVITY (for rated output)
1.4V Balanced
0.7V Unbalanced

A-WEIGHTED SIGNAL TO NOISE RATIO
96dB (113dB below rated output) Balanced
93dB (110dB below rated output) Unbalanced

INTERMODULATION DISTORTION
0.1% maximum if instantaneous peak power output does not exceed the rated output for any combination of frequencies from 20Hz to 20kHz

WIDE BAND DAMPING FACTOR
Greater than 200, 8 ohm load
Greater than 100, 4 ohm load

INPUT IMPEDANCE
15K ohms Balanced and Unbalanced

VOLTAGE GAIN
29dB

TRIGGER INPUT
5-15VDC, <1mA

TRIGGER OUTPUT
12VDC, 50mA maximum, delayed 0.2 seconds

OVERALL DIMENSIONS
Width 10 inches (25.4 cm)
Height 3-5/32 inches (8 cm) including feet
Depth 14 inches (35.6 cm) including cables

WEIGHT
8.5 pounds (3.9 kg)

Spec’s DI-122 DAC

Frequency Response
+/-0.5dB from 20Hz to 20,000Hz

Total Harmonic Distortion
0.005%

Variable Output Level
0 – 4.0Vrms Unbalanced
0- 8.0Vrms Balanced

Signal To Noise Ratio (A-Weighted)
105dB

Dynamic Range
98dB

Output Impedance
Less than 100 ohms (Unbalanced and Balanced)

Digital Input Signal Format
Coaxial and Optical Inputs – SPDIF (PCM)
USB Input – PCM, DSD

Digital Input Sample Rate
Coaxial and Optical: 44.1kHz to 192kHz, 24-Bit
USB: 44.1kHz to 384kHz, 32-Bit (PCM), DSD64, DSD128, DXD352.8kHz, DXD384kHz

Digital Inputs
Coaxial 1 and 2: 0.5V p-p/75 ohms
Optical 1 and 2: – 15dbm to -21dbm (TOS Link)
USB: USB Type B Connector

Trigger Input
5-15VDC, less than 1mA

Trigger Output
12VDC, 25mA maximum total

Power Requirements
100-240 Volts, 50/60Hz at 10 Watts
Standby: Less than 0.5 watt
Note: Only use the AC/DC Power Adapter supplied with the Wadia di122

Overall Dimensions
Width is 10 inches (25.4cm)
Height is 3-5/32 inches (8cm) including feet
Depth is 14 inches (35.6cm) including cables

Weight
7 pounds (3.2 kg)